Getting started with pointscan/300 series hardware, Mount the hardware, Install pt-bus wiring between modules – Measurement Computing PointScan 300 Series rev.1.0 User Manual

Page 11: Connect power and i/o wiring to the modules, Install communication cabling, Apply power, Configure using io toolkit, Test the system, Configure your computer, Run the (citec) software

Advertising
Getting started with pointscan/300 series hardware, Mount the hardware, Install pt-bus wiring between modules | Connect power and i/o wiring to the modules, Install communication cabling, Apply power, Configure using io toolkit, Test the system, Configure your computer, Run the (citec) software | Measurement Computing PointScan 300 Series rev.1.0 User Manual | Page 11 / 42 Getting started with pointscan/300 series hardware, Mount the hardware, Install pt-bus wiring between modules | Connect power and i/o wiring to the modules, Install communication cabling, Apply power, Configure using io toolkit, Test the system, Configure your computer, Run the (citec) software | Measurement Computing PointScan 300 Series rev.1.0 User Manual | Page 11 / 42
Advertising
See also other documents in the category Measurement Computing Hardware: