Universal consumer interface (uci) - if equipped, Connecting the ipod, Universal consumer interface (uci) – Dodge 2009 DX-48 Charger SRT8 User Manual

Page 232: If equipped

Advertising
background image

UNIVERSAL CONSUMER INTERFACE (UCI) — IF
EQUIPPED

NOTE:

This section is for sales code RES and REQ/

REL/RET radios only with UConnect

௡. For sales code

RER, REN and REZ touch-screen radio UCI feature, refer
to the separate RER, REN or REZ User’s Manual. UCI is
available only if equipped as an option with these radios.

This feature allows you to plug an iPod

௡ into the

vehicle’s sound system through a 16–pin connector using
the provided interface cable.

UCI supports Mini, 4G, Photo, Nano, 5G iPod

௡ and

iPhone

௡ devices. Some iPod௡ software versions may not

fully support the UCI features. Please visit Apple’s
website for software updates.

NOTE:

• If the radio has a USB port, connecting an iPod௡ to this

port does not play the media. For playing an iPod

௡,

use the separate 16–pin connector port (in the glove
compartment on some vehicles).

• Connecting an iPod௡ to the AUX port located in the

radio faceplate, plays media, but does not use the UCI
feature to control the connected device.

Connecting The iPod

Use the optional connection cable to connect an iPod

௡ to

the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod

௡ is connected and synchronized to the vehicle’s UCI

system (iPod

௡ may take a few seconds to connect), the

iPod

௡ starts charging and is ready for use by pressing

radio switches, as described below.

NOTE:

• You may have to remove the connector pin protection

cap from the 16–pin connector port, prior to connect-
ing the cable.

230

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: