Autostick, Autostick operation, Autostick௡ operation – Dodge 2009 DX-48 Charger SRT8 User Manual

Page 273

Advertising
background image

Permanent Transmission Limp Home Mode
Permanent Limp Home Mode will be activated if the
transmission enters temporary Limp Home Mode three
times. Follow the reset procedure described under “Tem-
porary Transmission Limp Home Mode” in this section.
In Permanent Limp Home Mode, PARK, REVERSE, and
NEUTRAL will continue to operate. Second gear will
operate in the DRIVE position. The Malfunction Indicator
Light (MIL) may illuminate.

AUTOSTICK

Autostick

௡ is a driver-interactive transmission that offers

manual gear shifting to provide you with more control of
the vehicle. Autostick

௡ allows you to maximize engine

braking, eliminate undesirable upshifts and downshifts,
and improve overall vehicle performance. This system
can also provide you with more control during passing,
city driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.

Autostick

Operation

By placing the shift lever in the DRIVE position, it can be
moved from side to side. This allows the driver to select
a higher or lower range of gears. Moving the shift lever to
the left (-) triggers a downshift and to the right (+) an
upshift. The gear position will display in the instrument
cluster on the transmission range indicator.

NOTE:

• In Autostick௡ mode, the transmission will only shift

up and down when the driver manually moves the
shift lever right (D+) or left (D-).

• An UPSHIFT message will appear in the Electronic

Vehicle Information Center (EVIC) portion of the in-
strument cluster when using Autostick

௡. This message

appears in order to alert the driver to upshift to the
next gear. The UPSHIFT message will display while
operating the vehicle at higher engine revolutions per
minute (RPM).

STARTING AND OPERATING

271

5

Advertising
This manual is related to the following products: