Eiki DLP Projector EIP-5000 - Manual (Page 43)

41
ENTER button
KEYSTONE
button
UNDO button
Adjustment
button
('/"/\/|)
Mouse/adjustment
button (
' / " / \ / | )
ENTER button
UNDO button
KEYSTONE
button
For correcting an image desig-
nating the corner of the pro-
jected image.
For correcting an image desig-
nating the horizontal or vertical
axes.
For correcting the image distor-
tion which cannot be corrected
with “H & V KEYSTONE”.
*Only when “H & V KEY-
STONE” is set to the values
other than “0”, “IMAGE
RESIZING” can be adjusted.
(This function cannot be used
when correcting with “GEO-
METRIC ADJUSTMENT”.)
GEOMETRIC
ADJUSTMENT
H & V KEYSTONE
IMAGE RESIZING
↑
↑
Correcting Trapezoidal Distortion
When the image is projected either from the top or from the bottom towards the screen at an angle, the image
becomes distorted trapezoidally.
The function for correcting trapezoidal distortion is called
Keystone Correction .
There are the two types of the Keystone Correction.
1) “GEOMETRIC ADJUSTMENT” for correcting an image designating the corner of the projected
image
2) “H & V KEYSTONE” for designating the correction of the horizontal and vertical axes
Selecting the Type of the
Correction
Select the type of the keystone correction.
Press on the projector or on the
remote control.
• “GEOMETRIC ADJUSTMENT” will be dis-
played.
• Each time or is pressed, the display
toggles as follows:
GEOMETRIC → H & V KEYSTONE
ADJUSTMENT
The display ← IMAGE RESIZING *
disappears.