Elo TouchSystems ET1566L-9SWA-6 - Manual (Page 20)

2-13
Installing the Serial Touch Driver
To install your driver software, follow the instructions in the appropriate
following section.
Installing the Serial Touch Driver for Windows 2000, Me, 95/98
and NT 4.0
N OTE : For Windows 2000 and NT 4.0 you must have administrator access rights to install the
driver.
1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If the AutoStart feature for the CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
2 Follow the directions on the screen to complete the driver setup for your
version of Windows.
If the AutoStart feature is not active:
1 Click Start > Run.
2 Click the Browse button and locate the EloCd.exe program on the CD-ROM.
3 Click Open, then OK to run EloCd.exe.
4 Follow the on-screen directions to complete the driver setup for your version
of Windows.