2 802.1p port traffic class information, 1p port traffic class information -26, 1p port priority configuration screen – Enterasys Networks 5H1XX User Manual
Page 86: 1p port traffic class information, Figure 7-15
Configuring Traffic Classes
7-26
Device Control Menu Screens
Figure 7-15
802.1P Port Priority Configuration Screen
7.10.2 802.1P Port Traffic Class Information
This switch provides two priority levels with weighted fair queuing for port egress. This means
that any frames with a default or user priority from 0~3 are sent to the low priority queue “0” while
those from 4~7 are sent to the high priority queue “1” as shown in
Parameter
Description
Port
Numeric identifier for switch port.
Default Ingress User Priority
Default priority can be set to any value from 0~7, where 0~3
specifies the low priority queue and 4~7 specifies the high
priority queue.
Number of Egress Traffic Class
Indicates that this switch supports two priority output
queues.
802.1P Port Priority Configuration :
Port 1 - 12
Port Default Ingress Number of Egress
User Priority Traffic Class
--------------------------------------------------------------
1
0
2
2
0
2
3
0
2
4
0
2
5
0
2
6
0
2
7
0
2
8
0
2
9
0
2
10
0
2
11
0
2
12
0
2
<SAVE> <RETURN> <CANCEL> <PREV PAGE> <NEXT PAGE>
3583_35