Command / response table for sis commands, Command/response table for sis commands, Remote contr ol, cont’d – Extron Electronics RGB 201 User Manual
Page 36
RGB 201 R
xi Universal Interface • Remote Contr
ol
Remote Contr
ol, cont’d
3-4
Command/response table for SIS commands
Command
ASCII Command Response
Additional description
(host to switcher) (switcher to host)
Horizontal shift
Set horizontal shift
X@
H
Hph
X@]
Set horizontal shift value to
X@
(range -127 to +127).
Example
:
28H
Hph+028
]
Set horizontal shift value to +28.
Increment horizontal shift value
+H
Hph
X@]
Previous horizontal shift value +1 (shift right).
Decrement horizontal shift value
-H
Hph
X@]
Previous horizontal shift value -1 (shift left).
View horizontal shift value
H
X@]
Vertical shift
Set vertical shift
X@
/
Vph
X@
Set vertical shift value to
X@
(range -127 to +127).
Example
:
-5/
Vph-005
]
Set horizontal shift value to -5.
Increment vertical shift value
+/
Vph
X@]
Previous vertical shift value +1 (shift up).
Decrement vertical shift value
-/
Vph
X@]
Previous vertical shift value -1 (shift down).
View vertical shift value
/
X@]
View, information, part number, and firmware requests
Information request
I/i
Hph
X@
•Vph
X@
•Hrt
X$
•Vr
X$]
Example
Hph+028•Vph-005•Hrt48.400•Vrt60.000
]
Horizontal shift value +28; vertical shift value -5;
horizontal rate 48.4 kHz; vertical rate 60 Hz.
Request for part number
N/n
X^]
Example:
n
60-507-01
]
60-507-01 = RGB 201 Rxi.
Query software version
Q/q
X#]
Example:
q
1.23
]
Software version 1.23 (example only).