Contour Design Shuttle-Xpress NLE Multimedia Controller (Black) - Manual (Page 25)

5.7 Import Settings
Note: This import capability exists ONLY when an established setting is available. An
alternate approach could be to export a setting and, in so doing, give it a different name –
the one you want to use for a future import.
1. Click on the Options button and select Import settings .
2. Locate the setting you wish to import.
3. Once you have chosen the setting you want to import click
OK . This setting will now appear
in the Target Application Menu.
4. Click Apply when completed.
5.8 Export Settings
If you want to export an application set, in order to share it with other users, or back it up for
security:
1. Click on the Target Application Menu and select the application setting you would like to
export. (After so doing, you should now see this setting name highlighted in the Target
Application Menu).
2. Click on the Options button. Select Export settings from the pull-down menu.
3. A dialog box will prompt you to type a name for the file that will be created and to choose
its destination folder. Once you have done so, click on Save in the lower right hand of the
dialog box. The created file will have the .pref extension and will be located where specified.
5.9 Rebuild the whole settings file
This option will reset the settings collection of all Shuttle devices to the factory provided one.
Note:
With this operation all user-made settings and customized settings created
for all Shuttle devices will be lost and this operation can’t be undone.
1. Click on the Options button and select
Rebuild the whole settings file from the pull-
down menu.
2. A warning message will ask you to confirm this operation. Click Yes to proceed.
Contour Shuttle Multimedia Controllers 22