Contour Design Shuttle-Xpress NLE Multimedia Controller (Black) - Manual (Page 38)

Appendix 1: Example on how to program Global Settings
Below are the steps needed to program Global Settings on the ShuttlePRO by performing the
following associations:
• Alt+F4 (close the current window) to Button 13,
• the mouse wheel movement to the jog directions and
• the left and right arrows to the Shuttle positions by varying the frequency.
Step 1
1. Open the Contour Shuttle Control Panel.
2. Click on the Target Application Menu and select Global Settings.
Step 2: programming Button 13
3. Select Button 13 in the User Action Menu.
4. Select Type Keystroke from the Computer Response Menu.
5. Click in the Keystroke field then press the Alt key and the F4 key. “Alt+F4” should appear
in the Keystroke field. Select Once Only in the Frequency Menu.
6. In the Comment field write “Close the current window”.
Step 3: programming the Jog directions
7. Select Jog left in the User Action Menu.
8. Select Mouse Wheel from the Computer Response Menu.
9. Click on the Up button. Select Once Only in the Frequency Menu.
10. In the Comment field write “Wheel up”.
11. Select
Jog right in the User Action Menu.
12. Select Mouse Wheel from the Computer Response Menu.
13. Click on the Down button. Select Once Only in the Frequency Menu.
14. In the Comment field write “Wheel down”.
Step 4: programming the Shuttle positions
Step 4.1 - left positions
15. Select
Shuttle in left 1 in the User Action Menu.
16. Select Type Keystroke from the Computer Response Menu.
17. Click in the Keystroke field then press the left arrow on the keyboard. “Left Arrow” should
appear in the Keystroke field.
18. Select 5 Times per Second in the Frequency Menu.
19. In the Comment field write “Left Arrow - 5 t/s”.
20. Select
Shuttle in left 2 in the User Action Menu.
21. Select Type Keystroke from the Computer Response Menu.
22. Click in the Keystroke field then press the left arrow on the keyboard. “Left Arrow” should
appear in the Keystroke field.
23. Select 10 Times per Second in the Frequency Menu.
24. In the Comment field write “Left Arrow - 10 t/s”.
25. Select
Shuttle in left 3 in the User Action Menu.
26. Select Type Keystroke from the Computer Response Menu.
27. Click in the Keystroke field then press the left arrow on the keyboard. “Left Arrow” should
appear in the Keystroke field.
28. Select 15 Times per Second in the Frequency Menu.
Contour Shuttle Multimedia Controllers 35