Yamaha DTX-Multi12 Multi-Pad Electronic Percussion Instrument - Manual (Page 76)

76 Owner’s Manual
PATTERN Setting Area (PTN)
With the Pattern Name page displayed, press the [ENTER] button
to edit the name of the currently selected pattern.
PTN2-3-1 Pattern Name Setting page
In the Pattern Name Setting page (PTN2-3-1), you can freely
specify a pattern name of up to ten characters in length. Use
the [
B ]/[ C ] buttons to move the flashing cursor to the char-
acter you want to change, and then select a character using the
[-/DEC] and [+/INC] buttons. The following characters can be
used in pattern names.
[space]
MIDI Settings for Patterns
In the MIDI section, you can configure the MIDI messages sent
by the currently selected pattern on each individual MIDI chan-
nel. These settings affect MIDI messages sent to both the DTX-
MULTI 12’s internal tone generator and external MIDI devices.
With the MIDI page (PTN3) displayed, press the [ENTER] button
to access its seven parameter-setting pages (PTN3-1 to PTN3-7).
You can use the [
B ]/[ C ] buttons to navigate between these
pages.
• This section can be used only with User patterns. If a Preset pattern has
been selected, the [ENTER] button will not open a parameter-setting page.
1 MIDI channel (Ch)
Use this parameter to select the MIDI channel (1 to 16) to be
set.
B Transmit
Use this parameter to specify which MIDI messages will be
sent to the internal tone generator and to external MIDI
devices by the currently selected pattern on the MIDI channel
indicated by
1 .
• off ............. No MIDI messages will be sent.
• all.............. All applicable MIDI messages will be sent.
• PC............. Only MIDI Program Change messages (includ-
ing bank-select MSB/LSB) will be sent.
PTN2-3 Pattern Name page
PTN2-3≥≥<COMMON>
≥≥≥≥≥≥Name
PTN2-3-1
≥≥[Pattern≥1≥]≥≥
Pattern name
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}ßå
PTN3 MIDI
PTN3-1 MIDI Transmit page
Settings 1 to 16
Settings off, all, or PC
PTN3
≥≥≥≥≥≥MIDI
NOTE
PTN3-1≥≥≥≥≥≥Ch≥1
≥≥Transmit=all
1
2