Yamaha DTX-Multi12 Multi-Pad Electronic Percussion Instrument - Manual (Page 77)

TRIGGER
Ref
erence
KIT
MIDI
V
OICE
UTILITY
W
A
VE
PA
TTERN
PATTERN Setting Area (PTN)
Owner’s Manual 77
1 MIDI channel (Ch)
B Volume
Use this parameter to set the MIDI volume (Control Change
7) sent by the currently selected pattern on the MIDI channel
indicated by
1 . In terms of the internal tone generator, this
value affects all voices played on that channel.
• If “off” or “PC” has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as “---” and modification will not be possi-
ble.
• If you change the volume setting for MIDI channel 10, the setting on
the Kit Volume page (KIT2-1) will also change to this new setting.
1 MIDI channel (Ch)
B Pan
Use this parameter to set the stereo panning (Control Change
10) sent by the currently selected pattern on the MIDI channel
indicated by
1 . In terms of the internal tone generator, this
value affects all voices played on that channel.
• If “off” or “PC” has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as “---” and modification will not be possi-
ble.
1 MIDI channel (Ch)
B Bank select MSB (M)
Use this parameter to set a bank-select MSB value.
C Bank select LSB (L)
Use this parameter to set a bank-select LSB value.
D Program change (PC)
Use this parameter to set a program-change number sent by
the currently selected pattern on the MIDI channel indicated
by
1 .
• If “off” has been selected on the MIDI Transmit page (PTN3-1), this
setting will be displayed as “---” and modification will not be possible.
To select a DTX-MULTI 12 drum kit, set parameters for
MIDI channel 10 as follows.
• Preset kits:
MSB = 125, LSB = 000, PC = Preset kit number
• User kits between U001 and U100:
MSB = 125, LSB = 001, PC = 001 to 100
• User kits between U101 and U200:
MSB = 125, LSB = 002, PC = 001 to 100
If a program-change setting is made for MIDI channel 10, the
current drum kit will be changed immediately.
1 MIDI channel (Ch)
B Variation send level (Var)
Use this parameter to set the variation-send level to be sent by
the currently selected pattern.
• If “off” or “PC” has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as “---” and modification will not be possi-
ble.
• If MIDI channel 10 is selected, this setting will be displayed as “---” and
modification will not be possible.
PTN3-2 MIDI Volume page
Settings 1 to 16
Settings 0 to 127
PTN3-3 MIDI Pan page
Settings 1 to 16
Settings L64 to C to R63
PTN3-2≥≥≥≥≥≥Ch≥1
≥≥≥Volume=100
1
2
NOTE
PTN3-3≥≥≥≥≥≥Ch≥1
≥≥≥≥Pan=≥C
1
2
NOTE
PTN3-4 Bank Select page
Settings 1 to 16
Settings 000 to 127
Settings 000 to 127
Settings 001 to 128
PTN3-5 Variation Send page
Settings 1 to 16
Settings 0 to 127
PTN3-4≥≥≥≥≥≥Ch≥1
M000/L000/PC001
1
2 4 3
NOTE
PTN3-5≥≥≥≥≥≥Ch≥1
Var=≥≥0(Dry=127)
1
2
NOTE