Pattern quantization & management, Ptn4 pattern quantization & management, Chorus send page – Yamaha DTX-Multi12 Multi-Pad Electronic Percussion Instrument User Manual

Page 78: Reverb send page, Quantize pattern page, Ptn3-6≥≥≥≥≥≥ch≥1 ≥≥chosend=≥≥0, Ptn4 ≥≥≥≥≥≥job

Advertising
background image

78

Owner’s Manual

PATTERN Setting Area (PTN)

1

MIDI channel (Ch)

B

Chorus send level (ChoSend)

Use this parameter to set the chorus-send level to be sent by
the currently selected pattern.

• If “off” or “PC” has been selected on the MIDI Transmit page (PTN3-1),

this setting will be displayed as “---” and modification will not be possi-
ble.

• If you change the chorus send level for MIDI channel 10, the setting on

the Chorus Send page (KIT3-1) for the currently selected kit will also
change to this new setting.

1

MIDI channel (Ch)

B

Reverb send level (RevSend)

Use this parameter to set the reverb-send level to be sent by
the currently selected pattern.

• If “off” or “PC” has been selected on the MIDI Transmit page (PTN3-1),

this setting will be displayed as “---” and modification will not be possi-
ble.

• If you change the reverb send level for MIDI channel 10, the setting on

the Reverb Send page (KIT3-2) for the currently selected kit will also
change to this new setting.

Pattern Quantization & Management

In the JOB section, you can quantize the currently selected User
pattern, import SMF files, and perform other related tasks. With
the JOB page (PTN4) displayed, press the [ENTER] button to
access its seven parameter-setting pages (PTN4-1 to PTN4-7).
You can use the [

B

]/[

C

] buttons to navigate between these

pages.

• This section can be used only with User patterns. If a Preset pattern has

been selected, the [ENTER] button will not open a parameter-setting page.

From the Quantize Pattern page, you can correct irregularities in
the timing of notes making up the currently selected User pattern.
This is referred to as quantizing. With the Quantize page dis-
played, press the [ENTER] button to open the Quantize Pattern
Setting page.

PTN4-1-1

Quantize Pattern Setting page

1

Quantize

Use this parameter to specify the quantizing resolution as a
division of a whole note. The lower the resolution, the finer
the correction of timing.

PTN3-6

Chorus Send page

Settings

1 to 16

Settings

0 to 127

PTN3-7

Reverb Send page

Settings

1 to 16

Settings

0 to 127

PTN3-6≥≥≥≥≥≥Ch≥1

≥≥ChoSend=≥≥0

1

2

NOTE

PTN3-7≥≥≥≥≥≥Ch≥1

≥≥RevSend=≥40

1

2

NOTE

PTN4 JOB

PTN4-1

Quantize Pattern page

Settings

When time signature from PTN1 or for
recording is 3/8, 6/8, 9/8, 12/8, or 15/8:

16 note triplets
16 notes
8 note triplets
8 notes
4 notes
Dotted 4 notes

When time signature from PTN1 is other
than the above:

16 note triplets
16 notes
8 note triplets
8 notes
4 note triplets
4 notes

• The natural groove of a recorded performance may be lost as a

result of quantization. Note that once a pattern is quantized, it will
not be possible to reverse the procedure.

PTN4

≥≥≥≥≥≥JOB

NOTE

PTN4-1≥≥≥≥≥<JOB>

≥≥≥≥Quantize

PTN4-1-1

≥≥Quantize=ƒ

1

˙3

th

˙

th

©3

th

©

th

ƒ

th

¨

th

˙3

th

˙

th

©3

th

©

th

ƒ3

th

ƒ

th

CAUTION

Advertising