Troubleshooting, 152 en, Other information – Olympus LS-P5 Linear PCM Recorder User Manual

Page 152: Problem possible cause solution

Advertising
background image

152

EN

7

Other information

Troubleshooting

Problem

Possible cause

Solution

No sound can be heard

from the earphones

during recording.

[

Off

] is selected for [

Rec

Monitor

].

Select [

On

] for [

Rec Monitor

]

(

P.88).

Unable to erase a folder

The folder contains a file that

the voice recorder cannot

recognize.

Connect the voice recorder to a

computer to erase the folder (

P.146).

Noise when monitoring

a recording

Feedback is being caused.

Connecting a speaker with a built-in

amplifier may cause feedback during

recording. Using the earphones to

monitor recording is recommended.
Adjust the recording setup such as by

moving the earphones and microphone

farther apart, or ensuring the microphone

is not facing the earphones.

Unable to overdub

The file to be played back is not

in [

PCM 44.1kHz/16bit

] or [

PCM

44.1kHz mono

] format.

Select a file recorded in [

PCM

44.1kHz/16bit

] or [

PCM 44.1kHz mono

]

format (

P.33, P.58).

[

PCM 44.1kHz/16bit

] or [

PCM

44.1kHz mono

] is not set for

[

Rec Mode

].

Set [

PCM 44.1kHz/16bit

] or [

PCM

44.1kHz mono

] for [

Rec Mode

].

(

P.85).

Unable to write index

marks/temp marks

The maximum number of marks

(99) has been reached.

Erase unneeded marks (

P.71).

The file is locked.

Unlock the file (

P.80).

The file is a read-only file.

Unlock the file, or undo the read-only

setting on a computer.

Unable to charge the

batteries.

[

Alkaline

] has been selected for

[

Battery

].

To use the supplied rechargeable

batteries, select [

Ni-MH

] for [

Battery

].

Do not use the rechargeable batteries

at higher/lower temperatures than the

recommended range (

P.20, P.100).

The

`

OK

button was not

pressed.

Press the

`

OK

button as directed in

the confirmation screen shown when

connecting the USB connector.

[

Composite

] has been selected

for [

USB Class

].

Select [

Storage Class

] for [

USB Class

]

(

P.131).

Advertising