Olympus LS-P5 Linear PCM Recorder - Manual (Page 44)

44
EN
2
Recording
Recording
Recording menu
Various recording settings are available, letting you tailor recording to different recording
conditions.
[Rec Level] (
☞
P.84) Sets the recording level.
[Limiter] (
☞
P.85)
Choose whether the recorder automatically limits distortion if the
maximum input level is exceeded during recording.
[Rec Mode] (
☞
P.85) Sets the recording sound quality.
[Zoom Mic] (
☞
P.86) Sets the built-in stereo microphone’s directivity.
[Low Cut Filter] (
☞
P.87)
Reduces humming sounds from equipment such as air-conditioners or
projectors.
[Bright Sound] (
☞
P.87) Create recordings with bright, clear sound.
[Rec Scene] ( ☞ P.47)
Choose from several combinations of settings suited to particular
surroundings or conditions.
[Rec Monitor] ( ☞ P.88) Disable output of the recording monitor sound.
[External Input] (
☞
P.53) Choose the type of connector connected to the microphone/line jack.
[Timer Rec] (
☞
P.118) Adjust timed recording settings.
[Rec Standby] (
☞
P.89)
Choose whether pressing the REC (
s
) button switches the recorder to
standby mode so that the recording level can be adjusted.
[Fn Rec] (
☞
P.121) Choose the recording option assigned to the F2 button.
[V-Sync. Time] (
☞
P.93)
Choose how long recording continues after the input volume falls below
the level selected for [ V-Sync. Rec ] (
☞
P. 89 ).
[Slate Tone] (
☞
P.126)
Emit and record a slate tone for use as a reference during movie
recording.
[Test Tone] (
☞
P.129) Preview volume settings by emitting a test tone at a selected volume.