Epson EMP-1715/1710 - Manual (Page 32)

32 List of Functions
Image Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
Sub Menu Function
Color Mode You can select the quality of the image to suit your surroundings. s p.15
Brightness You can adjust the image brightness.
Contrast g You can adjust the difference between light and shade in the images.
Color Saturation You can adjust the colour saturation for the images.
Tint (Adjustment is only possible when NTSC signals are being input if you use composite video/S-video.)
You can adjust the image tint.
Sharpness You can adjust the image sharpness.
Abs. Color Temp. You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. When a high value is selected the image
becomes tinged with blue, when a low value is selected the image becomes tinged with red.
(This item cannot be selected if "sRGB
g " is selected as the "Color Mode" setting in the "Image" menu.)
Color Adjustment You can make adjustments by choosing one of the following
Red, Green, Blue: You can adjust the saturation of each colour individually.
(This item cannot be selected if values for "sRGB
g " or "Customized" are selected from "Image" - "Color Mode".)
R, G, B, C, M, Y: You can adjust the strength of each colour R (red), G (green), B (blue), C (cyan), M (magenta), Y (yellow) individually.
(This item can only be selected when "Customized" is selected from "Image" - "Color Mode".)
Reset You can reset all adjustment values for the "Image" menu functions to their default settings. To return all menu items to their default settings, see
s
p.39
Computer image Component video
g
/Composite video
g
/S-video
g