Epson EMP-1715/1710 - Manual (Page 59)

Replacing Consumables 59
Replacing the Air Filter
f Air filter replacement period
It is time to replace the air filter when:
• The air filter is ripped.
• When the message "The projector is overheating. Make sure
nothing is blocking the air vent, and clean or replace the air filter."
is displayed even though the air filter has been cleaned.
f How to replace the air filter
The air filter can be replaced even when the projector is suspended from a
ceiling.
A
After you turn off the projector's power and the
confirmation buzzer beeps twice, disconnect the
power cable.
B
Remove the air filter.
Put your finger into the recess of the air filter and slide it forward to
remove it.
C
Install the new air filter.
Slide the air filter in from the outside and push until it clicks into
place.
Procedure
q
Dispose of used air filters properly in accordance with your
local regulations.
Material quality of the frame section: Polycarbonate, ABS
resin
Material quality of the filter section: Polyurethane form