Onkyo TX-NR6100 7.2-Channel Network A/V Receiver - Manual (Page 107)

107
Setup Setup
1. Input/Output Assign
‰ HDMI 4K/8K Signal Format (Default Value: 4K Standard)
Set the 4K/8K signal format input and output by this unit. Set to suit the TV or
player connected.
• The corresponding resolution is different depending on the HDMI jack
connected. See "Corresponding input resolutions" ( →p171 ) for details.
4K Standard When using a High Speed HDMI Cable that supports
10.2 Gbps to connect a TV or player compatible with standard
4K signal formats (4K 30Hz, etc.)
4K Enhanced When using a Premium High Speed HDMI Cable that supports
18 Gbps to connect a TV or player compatible with high-
definition 4K signal formats (4K 60Hz, 4K HDR, etc.)
• There may be some image disruption depending on the
connected component and the HDMI cable. If this occurs,
switch to "4K Standard".
8K Standard When using a Premium High Speed HDMI Cable that supports
18 Gbps or an Ultra High Speed HDMI Cable that supports
48 Gps to connect a TV or player compatible with 4K/120p or
5K/8K signal formats
‰ Zone 2 HDMI (Default Value: Not Use)
Make the setting when you output to the Zone 2 TV connected to the HDMI OUT
SUB/ZONE 2 jack.
Use Enable this function
Not Use Disable this function
• When video and audio via HDMI input are output to ZONE 2,
set it to "Use".
‰ OSD Language (Default Value: English)
Select the on-screen display language from the following.
(North American models) English, German, French, Spanish, Italian, Dutch,
Swedish
(European, Australian, Asian and Taiwanese models) English, German,
French, Spanish, Italian, Dutch, Swedish, Russian, Chinese
‰ Impose OSD (Default Value: On)
Set whether or not to display information such as volume adjustment or
switching of input on the TV screen.
On OSD is displayed on the TV
• OSD may not be displayed depending on the input signal
even if "On" is selected. In this case, change the resolution
of the connected device.
Off OSD is not displayed on the TV