P109, Setup, Setup 1. input/output assign – Onkyo TX-NR6100 7.2-Channel Network A/V Receiver User Manual
Page 109: Digital audio input, Analog audio input
109
Setup
Setup
1. Input/Output Assign
3. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN
COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
BD/DVD
(Default Value: COAXIAL)
GAME
(Default Value: ---)
CBL/SAT
(Default Value: ---)
STRM BOX (Default Value: ---)
PC
(Default Value: ---)
CD
(Default Value: ---)
TV
(Default Value: OPTICAL)
PHONO
(Default Value: ---)
COAXIAL,
OPTICAL
Assign the COAXIAL terminal or OPTICAL terminal to any
input selector.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
4. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If
you do not assign a jack, select "---".
BD/DVD
(Default Value: AUDIO 1)
GAME
(Default Value: ---)
CBL/SAT (Default Value: AUDIO 2)
STRM BOX (Default Value: AUDIO 3)
PC
(Default Value: ---)
CD
(Default Value: AUDIO 4)
TV
(Default Value: ---)
PHONO
(Default Value: PHONO)
• The setting cannot be changed.
AUDIO 1,
AUDIO 2,
AUDIO 3,
AUDIO 4
Assign the AUDIO IN terminal to any input selector.