Onkyo TX-NR6100 7.2-Channel Network A/V Receiver - Manual (Page 16)

16
Remote Controller
12. TONE buttons : Adjusts the sound quality. Press
"TREBLE", "BASS", or "VOCAL" to select what
you want to adjust, then adjust with + and -.
TREBLE/BASS button : You can adjust the
sound quality of the front speakers.
1.Press TREBLE or BASS to select the content
to adjust.
TREBLE: Enhances or moderates the high-
tone range of the front speakers.
BASS: Enhances or moderates the low-tone
range of the front speakers.
2. Press + or - to adjust.
VOCAL button : Emphasizes movie dialogues
and music vocals to listen to them more easily.
It is effective to movie lines in particular. Also, it
exerts the effect even if the center speaker is not
used. Select a desired level from "1" (low) to "5"
(high).
1. Press VOCAL.
2. Press + or - to adjust.
• Depending on the input source or listening
mode setting, selection is not possible, or the
desired effect may not be achieved.
13. LISTENING MODE buttons : Selects a listening
mode ( →p71, p154 ).
14. DIMMER button : Switches the brightness of the
display with three levels. It cannot be turned off
completely.
15. ZONE 2 SHIFT button : Used to control the
multi-zone function ( →p88 ). (The ZONE 3
SHIFT button cannot be used with this unit.)
16. VOLUME buttons
17. CLEAR button : Deletes all characters you have
entered when entering text on the TV screen.
18. MEMORY button : Used to register DAB
(European models)/AM (North American,
Australian, Taiwanese and Asian models)/FM
radio stations. ( →p70 )
19. MODE button : Switches between automatic
tuning and manual tuning for AM (North
American, Australian, Taiwanese and Asian
models)/FM stations ( →p65 ), and allows you
to select the order for displaying DAB stations
(European models) ( →p69 ). Also, when an
HDMI CEC function-enabled AV component is
connected to this unit, you can switch "3. Play
buttons" between "CEC MODE" and "RCV
MODE" (normal mode).