Euro-Pro GLASS BOWL EP108H - Manual (Page 4)

3
OPERATING INSTRUCTIONS
Power Unit
The Power Unit operates on 120V.,
60Hz. electrical power. Never allow the
power unit to become wet when plugged
into an electrical outlet.
The Bravetti Glass Food Processor is an indispensable kitchen tool for blending,
chopping, mixing or pureeing when preparing your favorite recipes. For best results, be
sure to carefully read all the instructions contained in this book before using this
appliance.
Warning: The power unit should
never be immersed in water.
Caution: Make sure that the
power unit is unplugged from
power source before attaching
or removing any accessory.
Speed Control & Locking/
Unlocking Button
The speed control & locking/unlocking
button that is on the power unit will
automatically lock the power unit onto the
processor bowl when you turn it on.
The food processor has a variable speed
control dial and “Pulse”.
The speed can be adjusted while the
food processor is in use.
Use of the “Pulse” button allows greater
control over the texture of the food being
processed. You can also use "Pulse"
when the unit is in the "Off" position.
Please note that the "Pulse" is only
intended to be used for short "bursts" of
processing.
Operating the Food Processor
Using the Chopping Blade:
1. Place the food processor bowl onto
the slip guard pad.
2. Holding the chopping blade by
plastic hub, remove the protective
blade cover and insert it onto the
spindle. (Fig. 1)
3. Place the spindle with the blade
onto the locating pin in the food
processor bowl. (Fig. 2)
4. Add ingredients that you wish to
process into the bowl.
5. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
(Fig. 3)
6. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl. (Fig. 4)
CAUTION: Make sure that the unit
is unplugged from the power
source.
CAUTION - Blades are sharp. Use
extreme caution when handling
the blade, always hold it by the
plastic hub. Do not immerse the
power unit in water.
Fig. 1
+ =
Fig. 2
Fig. 3
Fig. 4
4
OPERATING INSTRUCTIONS
Operating:
1. Plug power cord into an electrical
outlet.
2. To turn the unit on, turn the speed
control more to the left until you get
the speed that you desire. The
speed can be adjusted while the unit
is in use.
3. Now you are ready to use the food
processor.
Note: Please note that the maximum
amount of liquid to be processed at
one time is 1 cup. Exceeding this
quantity of liquid will cause overflow.
Attention: Do NOT operate this unit
continuously for more than 10-15
seconds.
4. When you are finished using the
food processor, turn the unit “Off”.
5. Unlock the power unit and remove
from the food processor.
6. Remove the processor inner lid. Be
sure that all chopping blade has
stopped rotating before you remove
the processor inner lid.
Warning: Do NOT operate this
appliance when empty.
Using the Whipper:
1. Place the food processor bowl onto
the slip guard pad.
2. Insert the whipper onto the spindle.
(Fig. 5)
3. Place the spindle with the whipper
onto the locating pin in the food
processor bowl.
4. Add ingredients that you wish to
process into the bowl.
5. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
6. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl.
+ =
Fig. 5
Fig. 7 Fig. 8
Slicing & Shredding Blades
CAUTION: Make sure that the unit
is unplugged from the power
source before inserting or removing
attachments.
1. Select the blade that you wish to
use. (Fig. 6)
2. To insert the blade of your choice
into the blade holder, place the
longer tab of the blade into the blade
holder first. (Fig. 7)
3. Press the other end of the blade until
it clicks into place. (Fig. 8)
4. Fit the processor bowl and spindle
as detailed on the page 3. (Fig. 9)
5. Using the finger holes in the blade
holder, fit it over the spindle and
place spindle in processor bowl.
(Fig. 10)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
6. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
(Fig. 11)
7. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl. (Fig. 12)
Fig. 6
Fig. 9
Fig. 10 Fig. 11
Fig. 12
CAUTION: Never place food
processor bowls (glass or plastic)
in microwave or over direct heat.