HP STORAGEWORKS E1200-160 - Manual (Page 114)

Serial/Telnet User Interface
114 Network Storage Router e1200-160
■ Create (C) creates a new map entry for a newly added device.
■ Remove Gaps (R) removes gaps in the listed sequence of LUNs.
■ Delete (D) deletes a map entry.
■ Exit (X) returns to the previous menu.
Scrolling between Display Pages of the Edit Map Entries Screen
To scroll up and down the map entries, select P or N.
Adding a Map Entry to a Fibre Channel Map
To add a new entry to a Fibre Channel map:
1. In the Map Edit Entries screen, select Add (A).
2. Enter the desired LUN ID.
If the selected LUN is already present in the map, a prompt is displayed that
asks to either confirm the override or enter different address information.
A device selection list is automatically generated.
Note: Devices cannot be mapped to their native port.
3. To select the map entry to edit, enter the number from the left-hand column of
the Port Map Edit Display screen.
A Device List is displayed.
Figure 51: Device List generated for a Fibre Channel port