Rack stability – HP STORAGEWORKS E1200-160 User Manual
Page 13
About this Guide
Network Storage Router e1200-160
13
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. Contact with
this surface could result in injury.
WARNING:
To reduce the risk of personal safety from a hot
component, allow the surface to cool before touching.
Power supplies or systems marked with these symbols indicate
the presence of multiple sources of power.
WARNING:
To reduce the risk of personal safety from electrical
shock, remove all power cords to completely disconnect power
from the power supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING:
To reduce the risk of personal safety or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.
Rack Stability
Rack stability protects personnel and equipment.
WARNING:
To reduce the risk of personal safety or damage to the
equipment, be sure that:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
In single rack installations, the stabilizing feet are attached to the rack.
■
In multiple rack installations, the racks are coupled.
■
Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.