HP STORAGEWORKS E1200-160 - Manual (Page 28)

Configuration Overview
28 Network Storage Router e1200-160
Telnet
From most Microsoft ® Windows ® 9x, Windows NT ® , and Windows 2000 ®
systems, users can start a Telnet session from the DOS (command) shell after the
IP address has been set.
For complete information on accessing and using the Telnet UI, see Chapter 4,
"
Serial/Telnet User Interface ."
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the
put and the get commands.
For more information, see Chapter 5, " FTP User Interface ."