C. location, D. setup, C. location d. setup – Hoshizaki STACKABLE CRESCENT CUBER KM-2100SWH3 User Manual

Page 10

Advertising
background image

10

C. Location

CAUTION

1. This icemaker is not intended for outdoor use. Normal operating ambient

temperature should be within 45°F to 100°F (7°C to 38°C); Normal operating
water temperature should be within 45°F to 90°F (7°C to 32°C). Operation
of the icemaker, for extended periods, outside of these normal temperature
ranges may affect icemaker performance.

2. This icemaker will not work at sub-freezing temperatures. To prevent damage

to the water supply line, drain the icemaker if the air temperature is going to
go below 32°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."

For best operating results:

• The icemaker should not be located next to ovens, grills, or other high heat producing

equipment.

• The location should provide a firm and level foundation for the equipment.
• Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of

maintenance and/or service should they be required.

D. Setup

CAUTION

Before operating the icemaker, the bin control thermostat assembly must be
installed correctly. Failure to properly install the assembly could result in ice
backup and unit damage.

1) Unpack the storage bin, and attach the 4 adjustable legs provided (bin accessory) to

the bottom of the storage bin.

2) Position the storage bin in the selected permanent location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin using the 2 mounting brackets and the bolts

provided. See Fig. 2.

Fig. 2

Icemaker

Mounting Brackets

Bolts

Bin

Advertising
This manual is related to the following products: