HP DL385 - Manual (Page 23)

Server component identification 23
Remote management connector
The 30-pin remote management connector, located on the system board, is used to cable the RILOE II
option. For more information, refer to "SAS RILOE II Cabling (" RILOE cabling (SAS) " on page 67 )," "SCSI
RILOE II Cabling (" RILOE cabling (SCSI) " on page 77 )," or the Remote Insight Lights-Out Edition II User
Guide on the Documentation CD.
Identifying hot-plug fans
Item Description Configuration
1 Fan 1 Primary
2 Fan 2 Redundant
3 Fan 3 Redundant
4 Fan 4 Primary
5 Fan 5 Primary