Front fan bracket – HP DL385 User Manual
Page 32
Advertising
Server operations 32
1.
Align the PCI riser cage with the chassis and slide it into place.
2.
Tighten the thumbscrews to secure the PCI riser cage:
a.
Lift the thumbscrew knobs.
b.
Turn the thumbscrews clockwise while pressing down, until tightened.
c.
Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.
Front fan bracket
To remove the component:
1.
Power down the server (on page
2.
Extend or remove the server from the rack ("
Extend the server from the rack
3.
Remove the access panel ("
Advertising
This manual is related to the following products: