Removing a hot-plug sas hard drive – HP DL385 User Manual
Page 51
Advertising
Hardware options installation 51
2.
Prepare the SAS hard drive.
3.
Install the hard drive.
4.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (on page
Removing a hot-plug SAS hard drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (on page
2.
Back up all server data on the hard drive.
Advertising
This manual is related to the following products: