Installing a diskette drive – HP DL385 User Manual
Page 52
Advertising
Hardware options installation 52
3.
Remove the hard drive.
Installing a diskette drive
NOTE: This procedure shows images of the SCSI model server, but it also applies to the SAS model server.
1.
Power down the server (on page
2.
Extend the server from the rack, if applicable ("
Extend the server from the rack
3.
Remove the access panel ("
4.
Remove the protective cover on the server bezel from the front of the diskette drive bay.
5.
Slide the diskette drive into the diskette drive bay.
6.
Tighten the thumbscrew.
Advertising
This manual is related to the following products: