Transport position, Working techniques – Husqvarna 326HDA55X-Series User Manual
Page 17
English
– 17
WORKING TECHNIQUES
•
Tighten the knob.
Transport position
(326HE4)
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
1
Turn off the engine.
2
Loosen the knob on the shaft (clockwise).
3
Grip the handle on the cutting unit and angle the cutting
unit upwards. At an angle of 90 degrees there is a stop
position. To pass the stop position, pull out the lock button.
4
Fold down the cutting unit against the shaft.
5
Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit in this
position.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.