Installing the server into the rack, Powering up and configuring, 25 powering up and configuring – HP AMS DL320 User Manual
Page 25
Server setup 25
Installing the server into the rack
To install the server into a rack with square, round, or threaded holes, refer to the instructions that ship
with the rack hardware kit.
If you are installing the server into a telco rack, order the appropriate option kit at the RackSolutions.com
e server-specific instructions on the website to install
the rack brackets.
Use the following information when connecting peripheral cables and power cords to the server.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not
plug telephone or telecommunications connectors into RJ-45 connectors.
Item Description
1
PCI-X expansion slot 2, full-length (optional PCI Express
slot 1)
2
PCI Express expansion slot 1, low-profile, half-length
3 Power
supply
4 UID
button/LED
5
10/100/1000 NIC 2
6
10/100/1000 NIC 1
7
iLO 2 management port
8 Serial
connector
9 Keyboard
connector
10 Mouse
connector
11 Video
connector
12
USB connectors (2)
Powering up and configuring
IMPORTANT: The F8 key is available only when a supported storage controller is installed in the server.