13 re-instate recovery qualifiers (rrq), Table 62.rrq payload table 63.rrq acc payload, 13 “re-instate recovery qualifiers (rrq) – Hitachi ULTRASTAR 15K450 HUS154530VLF400 User Manual

Page 105

Advertising
background image

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification

89

The Extension field is used to specify any additional bit flag, parameters, or other information defined by the document asso-
ciated with the Capability Entry. The drive does not currently make use of Extension field, therefore all Capability Entries
returned by the drive are 4 bytes in length.

17.3.13 Re-instate Recovery Qualifiers (RRQ)

The Re-instate Recovery Qualifier (RRQ) can be sent by the Initiator to the drive, as an indication that the Recovery Qualifier
(S_ID, D_ID, OX_ID, RX_ID, SEQ_ID, and SEQ_CNT) for an aborted exchange may be reused. RRQ is not required by the
drive following an aborted exchange. Following an ABTS the drive allows immediate reuse of the Recovery Qualifier. The
drive responds to RRQ with a valid ACC.

The following tables show the RRQ payload and the RRQ ACC payload.

Table 67: RRQ payload

Table 68: RRQ ACC payload

The drive performs no protocol checking on the RRQ payload. When it recognizes an ELS with 12h in byte 0, it simply
responds with an RRQ ACC.

Byte Item

Size

(Bytes)

0-3

Command Code = 12000000h

4

4

reserved 1

5-7

Originator S_ID

3

8-9

OX_ID 2

10-11

RX_ID 2

12

-

43

Association Header (Opt)

32

Byte Item

Size

(Bytes)

0-3

ACC Code = 02000000h

4

Advertising
This manual is related to the following products: