Hitachi ULTRASTAR 15K450 HUS154530VLF400 - Manual (Page 215)

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
199
19.12.2 Parameter data for Read Keys
Table 165: PERSISTENT RESERVE IN, parameter data for Read Keys
Generation is a counter that increments when PERSISTENT RESERVE OUT command with “Register” or “Preempt and
Clear” completes successfully. Generation is set to 0 as part of the power on reset process and hard reset process.
The Generation field contains a 32-bit counter that the Target shall increment every time a PERSISTENT RESERVE OUT
command requests a Register, a Clear, a Preempt, or a Preempt and Abort service action. The counter shall not be incremented
by a PERSISTENT RESERVE IN command, by a PERSISTENT RESERVE OUT command that performs a Reserve or
Release service action, or by a PERSISTENT RESERVE OUT command that is not performed due to an error or reservation
conflict. Regardless of the APTPL value the generation value shall be set to 0 as part of the power on reset process.
The Additional Length field contains a count of the number of bytes in the reservation key list. If the allocation length speci-
fied by the PERSISTENT RESERVE IN command is not sufficient to contain the entire parameter list, then only the bytes
from 0 to the maximum allowed allocation length shall be sent to the Initiator. The incremental remaining bytes shall be trun-
cated, although the Additional Length field shall still contain the actual number of bytes in the reservation key list without con-
sideration of any truncation resulting from an insufficient allocation length. This shall not be considered an error.
The Reservation Key list contains the 8-byte reservation keys for all Initiators that have registered through all ports with the
Target.
Byte
Bit
7 6 5 4 3 2 1 0
0-3
(MSB)
Generation
(LSB)
4-7
(MSB)
Additional length (n-7)
(LSB)
8-15
(MSB)
First reservation key
(LSB)
:
(n-7)
-
n
(MSB)
Last reservation key
(LSB)