Hitachi ULTRASTAR 15K450 HUS154530VLF400 - Manual (Page 314)

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
298
19.59.5 Download Microcode and Save (Mode 00111b) - Multiple Binary Files
In this mode the target receives a segment of the binary microcode file. The Parameter List Length (segment length) of each
segment shall be a multiple of 4K bytes. The total length of all segments received shall be equal to the total length of the binary
microcode file. All segments must be sent in the proper sequential order.
If an invalid Parameter List Length is specified, Check Condition status is returned with sense key of Illegal Request and
additional sense code of Invalid Field in CDB.
The first segment sent in this mode indicates, by default, the first segment of the binary microcode file. If a Check Condition
status is returned in this mode, a Buffer ID == 00h in the subsequent Write Buffer command in this mode indicates the first
segment of the binary microcode file. Otherwise the Buffer ID field is ignored.
The Buffer Offset field is ignored.
After all segments of the binary microcode file have been received, the drive behavior is the same as Download Microcode and
Save (Mode 00101b) - Single Binary File.