X-1 (H2O Audio) Sport Integration System - Manual (Page 3)

Q. How do I know my case is securely attached?
A. Slide the Universal Locking Plate all the way into the
mount until you hear an audible 'click'. Try to remove
the case to verify it is locked in place.
Q. Will these attachments fit any H2O Audio Housing or
Case?
A. No. Our earlier housings & cases do not feature a
method for attaching the Universal Locking Plate to the
housing or case. For an updated list of compatibility,
please see www.h2oaudio.com
Q. How do I use this system with an armband?
A. The Outdoor Series Case comes with a neoprene
armband that allows the included belt clip to be
attached to the sleeve on the armband. Attach the SIS
Belt Clip Mount to the case and clip the belt clip into
the armband sleeve the same way as you did before.
Q. Will you have other Mounts available?
A. Only if you let us know which ones you want most.
Everyone is different, but if we hear your requests
enough, we will support your need with a product.
E-mail your requests to [email protected].
5. FAQ’s 4. Installing the Universal Locking Plate
The Universal Locking Plate can be mounted to orient
your H2O Audio case in either the up or down
orientation, depending on how you would like the case
to attach to the mount (as shown).
These tabs must
be facing down
towards the back
of the case
3. Introduction
The H2O Audio Sport Integration System provides the
Outdoor Series case a mounting solution for a variety of
sporting activities, while keeping the player protected.
Once the Universal Locking Plate has been added to the
case, it can easily and securely be attached to the Bike
Mount, Backpack Mount, or Belt Clip Mount.
The key to this system is the common interface between
the Universal Locking Plate on the case and the receiving
feature on each of the various mounts.
1. If your Outdoor case has a belt clip installed, it must be
removed, using a Phillips Head screwdriver. Once removed
the Universal Locking Plate can be installed.
2. The Universal Locking Plate consists of the plate, 2
screws, and the Universal Mount.
3. Install the plate to the back of the case, with the
supplied screws, orienting the case in which ever direction
you choose
4. Installing the Universal Locking Plate
2. SIS Features And Components
Designed to lock into any of the
receiving attachments.
Universal Locking Plate
Easily adjusts to fit any
standard bike handlebars.
(includes 3 rubber spacer
inserts)
Bike Mount
Can be attached to any bag or backpack shoulder-strap
Backpack Mount
Can be used to attached to
any belt or pocket.
Belt Clip Mount Printed Instructions
Before using this system, please be sure to read, understand, and follow the instruction of this manual.
h2oaudio.com
Outdoor Sport
Integration System
L1 - 70 20070508