HP 2100 TN - Manual (Page 167)

EN Appendix C Printer Memory and Expansion 155
Checking Memory Installation
To verify that DIMMs are installed correctly:
1. Turn the printer on. Check that the printer control panel displays
the Ready light after the printer has gone through the startup
sequence. If an error message appears, a DIMM may have been
incorrectly installed. See “Troubleshooting Error Messages” on
page 99.
2. Print a configuration page by pressing the Go and Job Cancel
buttons simultaneously.
3. Check the memory section on the configuration page and
compare it with the configuration page printed before the DIMM
installation.
If the amount of recognized memory has not increased:
The DIMM may not be installed correctly (repeat the installation
procedure).
Try another DIMM Slot.
The DIMM may be defective (try a new DIMM).
Note If you installed a printer language (personality), check the Installed
Personalities and Options section on the configuration page. This area
should list the new printer language.