HP 2100 TN - Manual (Page 17)

EN Chapter 1 Printer Basics 5
Windows Installation
1. Run the install program by following the instructions for your
Windows version.
Note If you don’t have a CD-ROM drive, see page 13 for instructions.
2. Select installation type. The installer provides three options
for software installation.
• Typical (recommended method): This option loads printer
drivers, screen fonts, HP FontSmart, an uninstaller, and a
configuration utility that will allow you to control all printing
aspects.
• Minimal (for laptops and minimal installation): This option
loads only the required printer driver and screen fonts.
• Custom (for experienced users and network administrators):
This option allows you to choose which components will be
installed. The installation program will prompt you to select the
software items you wish to install. You must install at least one
printer driver to use your printer.
Windows Version To start installation:
Windows 9x/NT 4.0 a. Place compact disc in the CD-ROM drive.
Install will start automatically.
b. Follow the on-screen instructions.
If the CD-ROM drive does not automatically
run:
Select Run from the Start menu, and type
x:\setup in the Open box (where x is the
drive letter for the CD-ROM drive). Then
follow the remaining installation instructions.
Windows 3.x a. Place the compact disc in the CD-ROM
drive.
b. From the File menu, select Run.
c. Type x:\setup (where x is the drive letter
of your CD-ROM drive).
d. Follow the on-screen instructions.