Husqvarna 115 312526R1 - Manual (Page 17)

CONTROls
17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with a Briggs & Stratton
four-stroke overhead valve engine developing 28
horse power*. Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Control Locations
1
2
3
4
5
8
9
10
12
6
11
Motion control levers 1.
Parking brake 2.
Tracking knob 3.
Fuel tank 4.
Hydro release levers 5.
*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine
for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual
power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and
other variables.
Ignition switch 6.
Hour meter 7.
Throttle control 8.
Blade switch 9.
Seat adjustment lever 10.
Right tracking bolt 11.
Height adjustment 12.
Deck lift 13.
8058-039
13
5
7