Husqvarna 115 312526R1 - Manual (Page 20)

CONTROls
20
Blade Switch
To engage the mower deck, pull the blade switch
knob out. The mower blades are disengaged when
the knob is pressed down fully.
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.
Turn the key clockwise to start the engine.
8058-043
Blade switch
8058-043
Ignition switch
Parking Brake
The parking brake is found on the left of the machine.
Pull the lever backward to activate the brake and
push forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.
8058-044
Parking brake