Husqvarna 115 312526R1 - Manual (Page 29)

OPeRaTION
29
Running
Release the parking brake by moving the lever 1.
downward.
NoTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut
off the engine.
Move the steering controls to the neutral
2.
position (N).
Select the cutting height by setting the cutting 3.
height pin into the desired hole. Release foot
pedal latch and lower deck to set cutting height.
Make sure the work area is free from objects
4.
that could be thrown by the rotating blades.
8065-017
Cutting height selection
8065-016
Engage the mower deck and move the throttle to FULL
8058-044
Parking brake
Engage the mower deck by pulling out the 5.
blade switch.
Move throttle control to full throttle (rabbit
6.
symbol).
The machine’s speed and direction are
7.
continuously variable using the two steering
controls. When both controls are in the neutral
position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
WARNING!
Ensure that no one is near mower
when engaging blade switch.