Safety system, Tire pressures, Parking brake – Husqvarna 115 312526R1 User Manual

Page 37: Maintenance

Advertising
background image

maINTeNaNCe

37

Safety System

This machine is equipped with a safety system
that prevents starting or driving under the following
conditions.
The engine can only be started when:

The mower deck is disengaged.

1.

The steering controls are in the outer, locked

2.

neutral position.
The parking brake is on.

3.

Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
Make sure the engine stops when the park brake
is not engaged and the operator leaves the seated
position.
Check that the engine stops if the mower blades are
engaged and the driver temporarily moves off the
driver's seat.

IMPORTANT INFORMATION
To be able to drive, the driver must sit in the
seat and release the parking brake before
the steering controls can be moved into the
neutral position, otherwise the engine will
stop.

8061-032

Conditions for starting

Tire Pressures

Fill tire pressures to 15 psi / 103 kPa / 1 bar.

IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam
fill material to the drive tires. Excessive
loads created by foam filled tires will cause
premature failures.
Only use O.E.M. specified tires.

Parking Brake

Visually check that no damage is found on the lever,
links, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.

IMPORTANT INFORMATION
The machine must be standing still when
applying the parking brake.

8058-044

Parking brake

WARNING!
Faulty adjustment results in reduced
braking ability and can cause an
accident.

Advertising
This manual is related to the following products: