Husqvarna 115 312526R1 - Manual (Page 42)

maINTeNaNCe
42
Anti-scalp rollers
Anti-scalp rollers are properly adjusted when they are
just slightly off of the ground when the deck is at the
desired cutting height in the operating position. Anti-
scalp rollers then keep the deck in the proper position
to help prevent scalping in most terrain conditions.
IMPORTANT INFORMATION
Adjust anti-scalp rollers with the mower on a
flat level surface.
IMPORTANT INFORMATION
The anti-scalp rollers must not be used for
gauge wheels or the roller and deck may be
damaged.
The anti-scalp rollers can be set in three positions:
Upper position 1½ to 3" (38 to 76 mm) grass. •
Middle position 3" to 4½" (76 to 114 mm) grass. •
Lower position 4½" to 6" (114 to 152 mm) grass. •
The rollers should be approximately ¼" (6.5 mm) from
ground. Do not adjust the rollers to support the deck.
8058-054
Anti-scalp rollers