Husqvarna 115 312526R1 - Manual (Page 52)

52
TeChNICal DaTa
MZ6128 / 966502301
Engine
Manufacturer Briggs & Stratton 1)
Type ELS
Power 28 HP 2)
Lubrication Pressure w/ oil Filter
Fuel Min 87 octane unleaded (Max ethyl
alcohol 10%, Max MTBE 15%)
Fuel tanks capacity 5 gallons / 9 liters
Cooling Air cooled
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
Transmission
Transmission ZT-3400 Hydro Gear
Speed and direction controls Dual levers, foam gripped
Speed forward 0-9 mph - 0-17.7 Km/h
Speed reverse 0-5 mph - 0-9.7 Km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 13 x 6.5
Rear tires, turf pneumatic 23 x 10.50 4 ply
Tire pressures 15 PSI / 103 kPa / 1 bar
Frame
Cutting Width 61" (155 cm)
Cutting Height 1"-4½" (2.5-11.4 cm)
Uncut Circle 0
Number of Blades 3
Blade Length 21" / 53.3 cm
Nose Roller Yes
Sprung Seat Suspension
Hinged Arm Rests Yes
Hour Meter Yes
Blade Engagement 200 ft-lb Warner
Deck Construction 11 gauge fabricated
Productivity 4 acres/h / 16,187 m2/h
Dimension
Weight 770 lbs / 349 kg
Base Machine Length 75½" / 192 cm
Base Machine Height 42" / 107 cm
Base Machine Width 49" / 125 cm
overall Width, Chute Up 62¼" / 158 cm
overall Width, Chute Down 76" / 193 cm
1) See the Engine Manufacturer's
manual for engine specifications.
2) The power rating of the engines
indicated is the average net power
output (at specified rpm) of a typical
production engine for the engine
model measured to SAE standard
J1349/ISO1585. Mass production
engines may differ from this value.
Actual power output for the engine
installed in the final machine will
depend on the operating speed,
environmental conditions and other
variables.