Cleaning the printer – HP 2500n User Manual

Page 101

Advertising
background image

ENWW

Chapter 4 Problem solving and maintenance 99

Cleaning the printer

During the printing process, paper, toner and dust particles can accumulate inside the printer.
Over time, this buildup can cause print-quality problems such as toner specks or smearing. This
printer has a cleaning mode that can correct and prevent these types of problems.

To clean the engine

Note

The following procedure must be performed from the HP Color LaserJet 2500 Toolbox, which is
only supported for Windows 98 and later. To clean the engine when the computer is running a
different, supported operating system, see the late-breaking Readme on the root of the CD-ROM,
or visit

http://www.hp.com/support/clj2500

.

1

Make sure the printer is turned on and in the Ready state.

2

Open the HP Color LaserJet 2500 Toolbox.

3

On the Troubleshooting tab, click Cleaning Page and click Print. A page with a pattern
prints from the printer.

4

At the printer, remove any paper that might be in tray 1.

5

Remove the page that printed and load it face down into tray 1.

6

At the computer, press Clean.

Advertising
This manual is related to the following products: