Printing on both sides (duplexing manually), Printing on both sides (duplexing – HP 2500n User Manual
Page 50
48 Printing tasks
ENWW
Printing on both sides (duplexing manually)
To print on both sides of the paper, you will have to go to the printer and reinsert the paper
manually after the first side has printed.
CAUTION
Do not print on both sides of labels, transparencies, or vellum. Damage to the printer and jams
might result.
To duplex manually
1
Insert enough paper into one of the trays to accommodate the print job. If you are loading
special paper such as letterhead, load it in one of these ways.
• For tray 1, load the letterhead paper with the front side down, bottom in first.
• For optional tray 2 and optional tray 3, load the letterhead paper with front side up, top
edge toward the back of the tray.
2
In the printer driver, select the Print on Both Sides option and send the job to print.
3
After the job finishes printing, remove any blank paper from tray 1. Insert the printed stack,
with the blank side up, top edge in first. You must print the second side from tray 1.
4
Press
(
G
O
).
Tray 1
Optional tray 2 or
Optional tray 3
Tray 1