Husqvarna Pressure Washer 020524-00 3 - Manual (Page 3)

Not
for
Reproduction
Main Unit
316335 NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
PART NO. DESCRIPTION REF.
Footnotes
PART NO. DESCRIPTION REF.
BASE 1 313250GS
HANDLE 2 313252GS
GRIP, Handle 3 316502GS
GRIP, Handle 4 316501GS
SCREW, M5-0.8 x 20 5 -----
CAP, Plug 6 316712GS
SCREW, M6 x 18 7 -----
MOUNT, Vibration 8 316713GS
NUT, M6 1.0 9 -----
T-KNOB 10 316732GS
SCREW 11 316508GS
WASHER, Flat M8 12 -----
VALVE, Chemical Tank 13 317106GS
NUT, M8 FLANGE 14 -----
DECAL 15 316726GS
SCREW, M6 x 10 16 -----
CAP, Chemical Tank 17 316764GS
WIREFORM 18 316500GS
KNOB 19 194289GS
TANK, Chemical 20 315530GS
DECAL 21 316723GS
CAP, Fuel 22 316670GS
DECAL 23 316778GS
SCREW, M6 x 25 HEX 24 -----
WASHER 25 312005GS
VALVE, Fuel 26 209417GS
GROMMET 27 30809GS
TANK, Fuel 28 315531GS
BARB, Hose 29 317025GS
WRAP, Hose 30 316374GS
SCREW, M6-1.0 x 16 31 -----
HOSE, Vapor (cut to fit) 32 315017GS
CLAMP 33 48031JGS
* ( Engine parts are available through your Enine Manufacturer)
4
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
317992
020524-00 - 3,300 PSI Hus qvarna