Transport position, Working techniques – Husqvarna 327HDA65X User Manual

Page 18

Advertising
background image

WORKING TECHNIQUES

18 – English

(327HDA65)

•

Undo the knob.

•

Press the cutting unit against the hedge or some other
firm surface until the required angle is set.

•

Tighten the knob.

Transport position

(327HE4)

Once the work has been completed fold the cutting unit
back against the shaft to simplify transport and storage of
the hedge trimmer.

1

Turn off the engine.

2

Loosen the knob on the shaft (clockwise).

3

Grip the handle on the cutting unit and angle the
cutting unit upwards. At an angle of 90 degrees there
is a stop position. To pass the stop position, pull out
the lock button.

4

Fold down the cutting unit against the shaft.

5

Turn the knob (anti-clockwise).

CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit
in this position.

!

WARNING! Do not hold the cutting head
when you adjust the angle. The blades
are sharp and you could easily cut
yourself.

Advertising
This manual is related to the following products: