HP R507 - Manual (Page 106)

106 HP Photosmart R507/R607 User’s Manual
USB Configuration
This setting determines how the camera is recognized when
connected to a computer.
1 In the Setup Menu (page 103),
select USB.
2 In the USB Configuration
sub-menu, highlight one of these
two choices:
• Digital Camera —Causes the
computer to recognize the camera
as a digital camera using the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera.
• Disk Drive —Causes the computer to recognize the camera as a
disk drive using the Mass Storage Device Class (MSDC)
standard. Use this setting to transfer images to a computer that
does not have the HP Image Zone software installed on it (see
Transferring Images to a Computer without HP Image Zone
Software on page 114). This setting may not work with a
Windows 98 computer that does not have the HP Image Zone
software installed on it.
3 Press Menu/OK to save the setting and return to the Setup
Menu .
The new setting remains in effect until it is changed again, even
when you turn the camera off.