HP R507 - Manual (Page 45)

Chapter 2: Taking Pictures and Recording Video Clips 45
Using the Burst Setting
NOTE The Burst setting does not work in Panorama mode, nor
while recording video clips. You also cannot record audio
when using the Burst setting, but you can add an audio
clip later (see Record Audio on page 83). Also, the flash
does not work while using the Burst setting.
Burst allows you to take approximately 5 still pictures in a row
as quickly as the camera possibly can.
1 Press the Timer/Burst button until Burst appears in
the Image Display.
2 Frame the subject and press the Shutter button all the way
down and hold it. The camera takes approximately 5
pictures as quickly as possible until the Shutter button is
released.
The Image Display remains off during the capture. After the
burst pictures have been taken, each image appears one at a
time on the Image Display.
Using the Shooting Modes
NOTE The shooting mode does not apply when you are
recording video clips.
Shooting modes are pre-defined camera settings that are
optimized for taking pictures of certain scene types to give you
better results. In each shooting mode, the camera selects the
best settings, such as the ISO speed, F-number (aperture), and
shutter speed, optimizing them for the particular scene or
situation.