Husqvarna Trimmer 128 L - Manual (Page 21)

English---21 545196750 Rev. 3 2/17/09
TECHNICAL DATA
Model 128L (M10 LH arbor shaft thread)
Approved accessories Type
Cutting attachment / guard, part. no.
Trimmer head T25 537 33 83--06 / 545 03 09-01
Plastic blades Tricut 300 mm 531 00 38--11 / 545 03 09-01
Technical data
128C 128L
Engine
Cylinder volume, cu.in./cm 3 1.7/28 1.7/28
Cylinder bore, inch/mm 1.4/35 1.4/35
Stroke, inch/mm 1.130/28.7 1.130/28.7
Idle speed, rpm 2,800--3,200 2,800--3,200
Recommended max. speed, rpm 10,000 11,000
Speed of output shaft, rpm 8,000 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8 1.1/0.8
Catalytic converter muffler Yes Yes
Speed--regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro/CD Walbro/CD
Spark plug Champion Champion
RCJ--8Y RCJ--8Y
Electrode gap, inch/mm 0.024/0.6 0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor Zama Zama
Fuel tank capacity, US pint/liter 0.85/0.4 0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, lbs/kg 10/4.4 11/4.8
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3--1997, dB(A),
min/max: 94/97 94/97
Vibration levels
Vibration levels at handles, measured according to
ANSIB175.3--1997, m/s 2
At idle, left/right handles: 3/5 3/5
At max. speed, left/right handles: 9/8 9/8
Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all
the machine’s approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 128C (3/8 RH arbor shaft thread)
Approved accessories Type
Cutting attachment / guard, part. no.
Trimmer head T25 537 33 83--07 / 545 03 11--01