Overheating indicator light comes on – HONDA Outboard Motor BF130A User Manual

Page 96

Advertising
background image

94

OVERHEATING INDICATOR
LIGHT COMES ON AND
ENGINE SPEED IS LIMITED

TAKING CARE OF UNEXPECTED PROBLEMS

(RED)

COOLING SYSTEM INDICATOR

(RED)

Side-Mount Type

Panel-Mount/Top-Mount Types

If overheating activates the engine
protection system, idle the engine in
neutral, and check the cooling system
indicator.

If the engine overheats, the red
indicator light will come on, and the
engine protection system will limit
engine speed. If you are at cruising
speed, engine speed will decrease
gradually.

Remote-control types are equipped
with a buzzer that sounds when the
red indicator light comes on.

Engine overheating may be the result
of clogged water intake screens, or
there may be a problem with the
cooling system thermostat or water
pump.

If the engine is stopped after running
at full throttle, and then restarted
soon afterward, that could activate
the engine protection system
momentarily.

If water is flowing from the cooling
system indicator, continue idling for
30 seconds. If the cooling system is
OK, the red indicator light should go
off within 30 seconds, and the engine
will respond normally to throttle
control lever operation.

02/07/23 13:16:58 31ZW5601_095

Advertising